VMR-16HD20-2 Outlet Metered PDU Dual 20A 208V (16)C13
Includes
- Quick Start Guide
- DX9F-DTE-RJ - Adapter, DB-9F to RJ-45, Pinned for Cisco/Sun RJ-45 Consoles
- RJX-7 - Network Cable, RJ45, Cat5, Straight-Through, 7 ft. (2.1 M)
Overview
The VMR Outlet Metered PDU adds advanced outlet current and power metering capabilities to an intelligent power switching / reboot control solution to provide network support techs with a reliable, proactive approach to network power management. Accurate, effective per-outlet power metering, backed up by an array of versatile event monitoring functions can closely tracks trends, conditions and events at remote equipment installations, allowing administrators to detect signs of potential trouble and anticipate power consumption needs. Current monitoring capabilities are complimented by reliable, remote power reboot and switching functions, to remotely restore unresponsive devices and switch outlets On/Off as needed.
The VMR’s power control and monitoring capabilities work together to measure and report energy consumption data, provide a clearer perspective on emerging problems and supply a means for correcting issues at remote sites without the need for a service call or truck roll.
Specifications
DevOps Automation:
- RESTful Web Services API
- Modules Available on Ansible Galaxy
- SYSLOG & Streaming Telemetry Support
- Slack & Splunk Support
- Zero Touch Provisioning (ZTP) Support
In-Band/Out-of-Band Connectivity:
- In-Band: 10/100/1000Base-T Ethernet Port
- Out-of-Band: External Modem Ready
- Local Access: RJ45 RS232 Setup Port
- Supports IPv4 and IPv6
Unit Management:
- Compatible with WMU Enterprise Management Software
- CLI & HTML5 Web-Based GUI
- SNMP & Full MIB Support
- FTP/TFTP/SFTP/SCP
- DHCP/DNS/DDNS
- NTP for True Server Sync
- Multiple Concurrent SSHv2 Sessions
Remote Power Management:
- (16) Switchable IEC 60320 C13 Outlets
- Remote Individual or Group Outlet Switching
- On/Off/Reboot/Default/Load Shed Switching
- Outlet Sequencing & Power Up Delays
- User-Defined Power-Up Default Status & Outlet Status Retention
- Plug Naming, Grouping & Access Control
- Scheduled On/Off/Reboot Switching
- Dual 20 Amp Power Input Feeds
- 100-240V AC, 50/60 Hz
Security & Authentication:
- HTTPS, SSHv2, SNMPv3
- Transport Layer Security (TLS) v1.3
- IPSec (Server/Client) & OpenVPN
- IPtables / Static Routes
- Supports DUO, Okta and RSA® Two-Factor Authentication
- SAN Certificate Support
- AAA: LDAP / Active Directory / Kerberos / RADIUS / TACACS+
- Embedded Validated FIPS 140-2 Cryptographic Module
- Plug-Specific Password Protection
Event Monitoring, Logging & Notification:
- True RMS Current Metering
- Total or Branch Specific Metering
- Reports kWh, kW, Amps, Volts, Temperature
- Over-Current Alarm
- Lost Voltage (Line In) Alarm
- Invalid Access Lockout Alarm
- Circuit Breaker Open Alarm
- Temperature, Command & Event Logging
- Power Cycle Alarm
- Ping-No-Answer Alarm (Failed Ping Command)
- No Dialtone Alarm
- Alarm Notification via Email, SNMP, SYSLOG
- Alarm, Command, Access Audit, Current, Voltage, Watts and Temperature Logging
Specifications: | |
---|---|
Connectivity: | |
Ethernet Port: | 10/100/1000Base-T, RJ45 Port |
Local Access: | (1) RJ45 RS232C Console Port (Modem Ready) |
Power Management: | |
Voltage: | 100-240V AC, 50/60 Hz |
Power Distribution: | 3.2/7.6 kW (80% De-Rated) |
Controlled Outlets: | (16) IEC 60320 C13 |
Current: | (2) 20 Amps (16 Amps Derated) |
Power Inlet(s): | (2) IEC-60320-C20 Inlets, Dual Power Supplies |
Branches per Inlet: | 1 |
Power Input Cables: | Not Included (Sold Separately) |
Circuit Breakers: | (4) 20 Amp |
Physical/Environmental: | |
Size: | 3.5"H x 19"W x 8.7"D (1U) (8.9 cm H x 48.3 cm W x 22.1 cm D) |
Weight: | 20 Pounds (9.1 Kg) Shipping Weight |
Operating Temperature: | 32° to 122° F (0° C to 50° C) |
Humidity: | 10% to 90% RH |
Mounting: | 19" Rack Brackets Included |
Agency Approvals: | |
FCC, UL 62368-1, EN 62368-1, IEC 62368-1 | |
Downloads
Software
WTI regularly issues software updates to add new features, address irregularities and incorporate new security enhancements.
To speak with a qualified product engineer about custom software requests, please call: 1.800.854.7226.