WTI
How to Import Devices into NetReach Cloud
This guide explains how to quickly import multiple WTI devices into NetReach Cloud using the Import IP File method and a CSV file.
Tip: Bulk imports help accelerate large deployments and reduce manual device onboarding time.
Before You Begin
- Ensure all devices are reachable over the network
- Prepare a CSV file containing device IP addresses
- Verify device login credentials
- Confirm the correct Device Group is available in NetReach Cloud
The CSV file must contain a column labeled IP Address.
Import Steps
1. Prepare the CSV File
Create a CSV file containing all device IP addresses. Ensure the spreadsheet includes a column named IP Address.
IP Address 192.168.1.10 192.168.1.11 192.168.1.12
2. Open the Admin Center
Log into NetReach Cloud, navigate to the Admin Center, and select Add Units.
3. Select the Device Group
Choose the Device Group where the imported devices should be added.
4. Enter Device Credentials
Enter the username and password used for the local account on the WTI devices.
In the Search Method dropdown, select Import IP File.
5. Upload the CSV File
Upload the CSV file you created earlier and begin the import process.
NetReach Cloud will automatically add the listed devices into the selected Device Group.
Best Practices
- Verify all IP addresses before importing
- Ensure credentials are correct for all devices
- Use logical Device Groups for easier management
- Keep CSV formatting simple and consistent
- Test connectivity before performing large imports