COVID-19 Impact: Procedures in effect Updated 6/22/2020. Get More Info

Remote Relay Control

Remote Reboot 8700 Watt Catalyst 6500 Power Supply

The CCM Remote Relay Control unit provides an ideal solution for applications that require remote reboot and power switching capabilities for 8700 Watt Catalyst 6500 Power Supplies. When the CCM Remote Relay Control unit is connected to the dry contact relays on the Cisco 8700 Watt Power Supply, administrators and tech support personnel can remotely reboot the power supply via simple ASCII commands and user-friendly web-based menus. The CCM Remote Relay Controller can be operated via Web, Telnet, SSH or HTTPS; and if the primary network connection is unavailable, the CCM can also be rebooted or switched using commands sent via secondary network or dial-up PSTN connection.

Supports Both IPv4 and IPv6

In order to prepare for the upcoming switchover to IPv6 protocol, all WTI Remote Relay Control Units now provide full support for both IPv4 and IPv6 (the intended successor to IPv4.) This helps to ensure that WTI Remote Relay Control Units purchased today will be fully compatible with the planned IPv6 internet environment, and will not be rendered obsolete when the IPv6 protocol eventually becomes the new worldwide standard for network communications.

Includes Enterprise Management Software

remote relay control with enterprise management software

All WTI Remote Relay Control Switches include WTI’s convenient Enterprise Management Software, which drastically simplifies the task of managing multiple Remote Relay Control Switches spread throughout your network infrastructure. The WMU Enterprise Management Software provides a centralized command interface that allows administrators to easily manage, label and control multiple WTI Remote Relay Control Switches in large network applications, reducing the time required to access contact closure and relay switching functions on connected devices.

Once installed on your PC or laptop, the Enterprise Management Software can search a user-defined IP address range on your network and discover all compatible WTI devices within the range. Discovered devices are then added to the Enterprise Management Software’s inventory, allowing administrators to assign a descriptive tag to each Remote Relay Control Switch in order to denote the location or function of the device. In addition to providing a centralized interface for controlling relay functions, the Enterprise Management Software can also be used to control firmware updates for WTI products and edit and manage user accounts at individual or multiple WTI devices.

This category is currently empty. We don't intend to have randomly blank categories, please check back soon when we have something cool to put on this page...