Remote Power Switch

Remote Power Switch

When an important network element at a remote equipment site suddenly ceases to respond and takes your network down with it, often all it takes to get the network back on its feet again is a simple power reboot. But what if that troublesome network element is located in another state, or on the other side of the world? Suddenly, a power reboot doesn’t seem all that simple anymore … unless the network equipment rack in question includes a remote power switch.

Choose a Remote Power Switch for any application:
Basic Remote Power Switches
Metered+ Remote Power Switches
Outlet Metered Remote Power Switches
48V DC Remote Power Switching
High Amp C19 Remote Power Switches
Vertical Remote Power Switches
  • Switch power on / off / reboot remotely via internet
  • Remote Power Reboot Switch for Cisco Switches & Routers
  • On, Off, Reboot or Default Status Switching
  • Remote Individual or Group Outlet Switching
  • IP & SNMP Control
  • In-Band (10/100Base-T Ethernet Port)
  • Out-of-Band (External Modem Ready)
  • Local (RJ45 RS232 SetUp Port)
  • Timed & Scheduled Power Reboot/Shutdowns
  • User Defined Threshold Alarms
  • IP Address Filtering
  • HTTPS/SSL/TLS Secure Web
  • Remote Authentication:LDAP/Kerberos/RADIUS/TACACS+
  • 19" Rack Mounting Brackets
  • Supports Both IPv4 and IPv6
  • Includes Enterprise Management Software

A remote power switch provides a secure, reliable means to switch power on network equipment and other devices at remote installation sites, without an expensive service call or truck roll. Instead of dealing with the flood of angry calls from network users while you wait for your service team to reach a distant network equipment cabinet, you can have your network back up and running in no time by simply contacting the remote power switch and issuing a simple power on/off or reboot command … without even leaving your office or breaking a sweat.




Supports Both IPv4 and IPv6

In order to prepare for the upcoming switchover to IPv6 protocol, all WTI Remote Power Switches now provide full support for both IPv4 and IPv6 (the intended successor to IPv4.) This helps to ensure that WTI Remote Power Switches purchased today will be fully compatible with the planned IPv6 internet environment, and will not be rendered obsolete when the IPv6 protocol eventually becomes the new worldwide standard for network communications.

Includes Enterprise Management Software

remote power switch with enterprise management software

All WTI Remote Power Switches include WTI’s convenient Enterprise Management Software, which drastically simplifies the task of managing multiple Remote Power Switches spread throughout your network infrastructure. The WMU Enterprise Management Software provides a centralized command interface that allows administrators to easily manage, label and control multiple WTI Remote Power Switches in large network applications, reducing the time required to access power reboot and power switching functions on connected devices.

Once installed on your PC or laptop, the Enterprise Management Software can search a user-defined IP address range on your network and discover all compatible WTI devices within the range. Discovered devices are then added to the Enterprise Management Software’s inventory, allowing administrators to assign a descriptive tag to each Remote Power Switch in order to denote the location or function of the device. In addition to providing a centralized interface for invoking power reboot and switching functions, the Enterprise Management Software can also be used to control firmware updates for WTI products and edit and manage user accounts at individual or multiple WTI devices.



NBB-20VD16-3 Network Boot Bar Dual 16 Amp 200 - 240V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 16 Amp Input, 200-240V AC, (20) IEC 320 C13 Outlets

NBB-20VD20-1 Network Boot Bar Dual 20 Amp 100 - 120V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 20 Amp Input, 100-120V AC, (20) NEMA 5-15R Outlets

NBB-20VD20-2 Network Boot Bar Dual 20 Amp 208V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 20 Amp Input, 100-240V AC, (20) IEC 320 C13 Outlets

NBB-20VD30-1 Network Boot Bar Dual 30 Amp 100 - 120V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 30 Amp Input, 100-120V AC, (20) NEMA 5-15R Outlets

NBB-20VD30-2 Network Boot Bar Dual 30 Amp 208V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 30 Amp Input, 200-240V AC, (20) IEC 320 C13 Outlets

NBB-20VD32-3 Network Boot Bar Dual 32 Amp 200-240V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Dual 32 Amp Input, 200-240V AC, (20) IEC 320 C13 Outlets

NBB-20VS16-3 Network Boot Bar 16 Amp 200 - 240V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Single 16 Amp Input, 200-240V AC, (20) IEC 320 C13 Outlets

NBB-20VS20-1 Network Boot Bar 20 Amp 100 - 120V | WTI

WTI Vertical PDU, Metered, Switched, 0U, Single 20 Amp Input, 100-120V AC, (20) NEMA 5-15R Outlets

Loading...