SNMP Network Control

SNMP based control and monitoring of remote network devices is a valuable tool for almost any network administrator. WTI’s Serial Console Servers and Switched PDUs provide full MIB support, allowing you to review status, change configuration parameters, edit user privileges and control operating functions at remote units via SNMP commands.

SNMP traps provide an incredibly helpful means to alert network managers when undesirable conditions are detected at remote sites. Our DSM and RSM Console Servers and our VMR Switched PDUs can monitor your network devices, constantly watching for significant status changes. When high temperature readings, ping command failure or other noteworthy events are detected, our products can promptly notify you via SNMP trap, allowing rapid response to critical conditions, and often eliminating the need for expensive service calls and truck rolls to remote equipment sites.

When an SNMP trap alarm is generated, our units can send an initial trap to notify you that the alarm has been triggered, and then send another SNMP trap to let you know when the alarm condition has been cleared. When new users are added, SNMP commands can be used to remotely grant serial port or power control access, set user privileges and select passwords.

Our Switched PDUs are ideal for SNMP based power control, metering and management. In addition to the SNMP notification and user directory capabilities found on our Serial Console Servers, our VMR Switched PDUs also allow remote SNMP control of power switching and reboot operations. Simple, effective SNMP commands can be used to enable or disable power outlets, reboot devices, or reset outlets to user-defined default On/Off status. If you need to monitor power at a remote location, the VMR also allows you to gather current load and power consumption data and review power usage logs via SNMP, once again, saving you a long, time consuming trip to an off-site equipment locker.

SNMP Serial Console Servers

SNMP Switched PDUs

For more information on the SNMP management, metering and notification features provided by our DSM and RSM Serial Console Servers or VMR Switched PDUs, please click on one of the links below.

DSM Series Remote Console Servers - RJ45 Ports
RSM Series Remote Console Servers - DB9 Ports
CPM Series Remote Console Server + Power Reboot Switch
VMR Series Switched, Metered PDUs


our promise to you
10 reasons
Important Update
FREAK Vulnerability

FREAK Vulnerability
  • WTI PRODUCTS
    NOT AFFECTED

LEARN MORE!
Featured Products

DSM-40-E Console Server

Dual GigE + Modem
SSH/HTTPS/SSL/TLS/FIPS

LEARN MORE!

  • “     I’m happy to report that, thanks to your fast response, I’ve been able to get our new WTI power reboot switch online without a hitch... ”         - Ben G. Tacoma
  • “     WTI products are hands down the most reliable gear we've got in our racks... ”         - Glen Baker
  • “     I’m happy to report that, thanks to your fast response, I’ve been able to get our new WTI power reboot switch online without a hitch... ”         - Ben G. Tacoma