RSM-8
View More Images
The RSM-8 Remote Site Manager provides in-band and out-of-band access to RS232 console ports and maintenance ports on UNIX servers, routers and any other network element equiped with a serial console port. System administrators can access the RSM-8 via TCP/IP, using SSH or Telnet, or out-of-band via internal modem or local terminal. The RSM-8 features two separate command interfaces; a convenient, user-friendly secure web browser interface, and a simple command driven text interface.
Features
- SSHv2 Encryption
- RADIUS Authentication
- SNMP Control
- 8 RS232 DB-9 Serial Ports
- 10/100Base-T Ethernet Port
- Internal 56K v.92 Modem with Dial-Back Security
- Command Logging with Audit Trail
- Non-Connect Port Buffering
- Co-Location Features
- Any-to-Any Port Switching
- Port-Specific Password Protection
- Easy-to-Use Menu/Commands
- AC Powered
Applications
- Local or Remote Console Port Switching
- UNIX Serial Console Management
- TCP/IP, Dial-Up, SSH or Telnet Access to Consoles at Remote Locations
- Share Multiple Console Ports Using a Single VT100 Terminal or PC
- In-Band/Out-of-Band Network Management
Intelligent Port Selection
Each RS232 serial port of the RSM-8 can be individually accessed by number, name, or group via SSH or Telnet sessions. The RSM-8 also allows direct connections using TCP port assignments. Each serial port can be separately configured using simple menu driven commands to set the port password, data rates, flow control and other operating parameters.
The full matrix capability of the RSM-8 allows you to easily connect any two ports on the switch, even when the ports are using different communications settings. Ports can also be connected or disconnected by a third party with supervisor rights, and system managers can swap various RS232 devices between ports at a remote location.
Security and Co-Location
Secure Shell (SSHv2) encryption and address-specific IP security masks prevent unauthorized access to command and configuration functions. The RSM-8 also provides four different levels of user security; the Administrator, Supervisor, User and View Only level. The Administrator level, which is intended for use by system managers and other administrators, provides complete access to all port connection / disconnection functions, operating features and configuration menus, and also allows access to any port on the switch. The User level is ideal for co-location applications, since users are only permitted to view status and connect to the ports allowed by their user name and password.
Capture Buffer
"Buffer Mode" allows individual ports to capture and store incoming data, such as error and status messages received from attached console ports. This "snapshot" of the last data received is stored in memory, and can be viewed, saved or erased by the system operator at any time. Console messages can be stored in the RSM-8 port buffers, and sent to a remote location via SYSLOG, or an SNMP message can be generated to alert administrators when new console messages are received.
You may also be interested in this/these product(s)
