Network managers now have a cost-effective way to control network hardware without costly SNMP in-band restrictions. The CPM series of RS-232 console port switch allows both on-site and dial-up remote communications with any equipment designed with an RS-232 command port. This can eliminate the need to travel to equipment closets or worse yet, to remote sites. Even when the network is down, the CPM allows out-band communications with your control ports via POTS line and modem.
The CPM units are electronic data switches with individual port parameters, so communicating with ports of dissimilar baud rates is possible. Each port can be assigned a name (ie "ROUTER_1 or SERVER_NNN) to simplfy your remote access to your control ports. Password protection prevents unauthorized entry, and all parameters are stored and protected in non-volatile memory. The CPM series comes in 115 and 230V models, and are 19" rack ready. The CPM is also available in 8 and 16-port models, and our newest addition to the CPM family is our CPM-6400 unit, which is expandable to 64 ports.
Applications:
- Remote Console/AUX Port Switching
- Out-of-Band Network Management
- Remote Site RS-232 Port Switching
- Share a Modem Line at Remote Site
- Access Multiple RS-232 Control Ports From a Single Terminal
Features:
- CPM-400R - 19" Rack Mount Version (DB-9 Interface)
- CPM-400 - Stand Alone Version (RJ11 Interface)
- Password Protection
- Any-to-Any Port Switching
- Data Rate/Speed Conversion (300 to 384.K)
- No Software Required (VT100-Type Terminal Controlled)
- Menu-Driven Set-Up and Control Commands
- Also Available in 8 or 16 Port Models
Specifications - CPM-400 (Desktop Model)
| RS232 Interface: |
| Interface: |
RS-232, Asynchronous, 7/8 Bits, ASCII |
| Connectors: |
Four RJ11 Jacks, 6-Conductor |
| Data Rate: |
300 to 38.4K bps, All Standard Rates (Port Specific) |
| Flow Control: |
XON/XOFF, CTS/DTR, Both or None (Port Specific) |
| Parity: |
Even, Odd or None (Port Specific) |
| Stop Bits: |
1 or 2 (Port Specific) |
| Timeouts: |
No-Activity Disconnect; 1, 5, 10, 15 Seconds, 1, 5, 15, 30 Minutes |
| Operating Features: |
| LEDs: |
Power On, Ready |
| DIP Switch: |
Eight Position; Selects Default Baud Rate and Port Mode Parameters |
| Memory: |
Nonvolatile, Dynamically Allocated, Battery-Backed SRAM |
| Physical / Environmental: |
| Power: |
Internal, 120 or 240 VAC to 9 VDC @ 300 ma |
| Operating Temperature: |
0°C to +50°C |
| Storage Temperature: |
-20°C to +60°C |
| Size: |
1.75" H x 7.25" W x 4.5" D |
| Shipping Weight: |
2 lbs. |
| Agency Approvals: |
FCC Class A, CSA, UL |
Specifications - CPM-400R (Rack Mountable Model)
| RS232 Interface: |
| Interface: |
RS-232, Asynchronous, 7/8 Bits, ASCII |
| Connectors: |
Four (4) DB-9M AT (Pinned as COM Ports) |
| Data Rate: |
300 to 38.4K bps, All Standard Rates (Port Specific) |
| Flow Control: |
XON/XOFF, CTS/DTR, Both or None (Port Specific) |
| Parity: |
Even, Odd or None (Port Specific) |
| Stop Bits: |
1 or 2 (Port Specific) |
| Timeouts: |
No-Activity Disconnect; 1, 5, 10, 15 Seconds, 1, 5, 15, 30 Minutes |
| Operating Features: |
| LEDs: |
Power On, Ready, Port 1 to 4 Data Activity |
| DIP Switch: |
Eight Position; Selects Default Baud Rate and Port Mode Parameters |
| Memory: |
Nonvolatile, Dynamically Allocated, Battery-Backed SRAM |
| Physical / Environmental: |
| Power: |
Internal, 120/240 VAC, 50/60 Hz, 5 Watts |
| Operating Temperature: |
0°C to +50°C |
| Storage Temperature: |
-20°C to +60°C |
| Size: |
1.75" H x 19.0" W x 5.0" D (1U) |
| Shipping Weight: |
5 lbs. |
| Agency Approvals: |
FCC Class A, CSA, UL |
Any questions? Submit your request regarding this product.
|
|