The FTM-336 Fault Tolerant Modem is designed for applications that require a "must answer" modem that easily installs in standard 19 or 23 inch equipment bays. Designed for remote sites, the FTM always resets itself to answer on the specified number of rings, and is set to a fixed baud rate at the modem port. No external "AT" commands are required to configure the modem upon power-up, which is ideal when attached to equipment that cannot send "AT" setup strings.
Remote Configuration
Remote "AT" profile configuration allows you to configure modems anywhere in your network from one location. With password-protected remote configuration, you can issue AT commands to a remote FTM for maintenance or troubleshooting as if you were on-site.
Fault Tolerant Operation
Special circuitry in the FTM monitors for power brown-out, static discharge, and loss of carrier conditions. Any of these conditions will cause the modem to be reset and refreshed with an internal "AT" command string to assure reliable "must answer" operation.
AC and DC Powered Models
The FTM-336 is available in both AC and DC powered models. The FTM-336AC is 120 VAC powered and the FTM-336DC is -48 VDC powered.
Reliability and Support
The FTM is built in the USA and backed by a two year warranty. NetReach products are installed in thousands of network sites world wide. Our customers know they can depend on superior quality and reliability for their most mission-critical operations.