Electronic equipment sometimes "locks-up", requiring a service call just to flip the power switch to do a simple reboot. The TPS-2 CE Telnet Power Switch gives you the ability to perform this function from anywhere on the LAN/WAN, or if the network is down, to simply dial-in from a modem for out-of-band control.
Intelligent Power Control
The TPS-2 CE can communicate over any TCP/IP network using standard Telnet, or out-of-band using an external modem and basic VT100 type terminal emulation. Each outlet can be assigned an individual password, device name, reboot delay time and unique power-up default state.
Security Features
Address-specific IP security masks prevent unauthorized sources from accessing the TPS-2 CE menu via network. The TPS-2 provides two levels of operating passwords; the System Administrator Level (which allows access to all configuration and switching functions), and the User Level (which only allows switching of assigned plugs.)
Easy to Configure, Easy to Use
The TPS-2 CE can be configured via network, via modem, or locally via the TPS-2 CE Console Port. Easy to use commands let you assign a location name, set system parameters, and view plug status. Outlets can be switched On, Off, or Booted using plug names or numbers.
TPS-2 Mounting Options
Optional mounting kits are available for various installation
configurations. Our Rack Mount Kit allows installation in standard, 19 inch equipment racks and our Wall Mount Bracket kit allows the TPS-2 to be secured to a wall board