NBB-20VS30-2 Network Boot Bar 30 Amp 208V | WTI

NBB-20VS30-2 Network Boot Bar 30 Amp 208V

WTI Vertical PDU, Metered, Switched, 0U, Single 30 Amp Input, 200-240V AC, (20) IEC 320 C13 Outlets

SKU:  NBB-20VS30-2
CALL OR EMAIL FOR PRICING & AVAILABILITY
1-800-854-7226 info@wti.com

Accessories Included:

  • Network Cable, Cat 5e, 7 ft. (2.1 m)
  • 0U Button Mount Bracket Kit
  • 0U Bracket Mounting Kit
Input
Voltage: 208 VAC
Current: 30 Amp
Connector: NEMA L6-30P Power Cord (10ft)
Output
Voltage: 208 VAC
Current: 30 Amp
Outlets: (20) IEC C13

 

The NBB-20VS30-2 includes a robust selection of monitoring features, including event alarms, SNMP polling to help you keep tabs on vital network elements, avoid costly service calls and maximize up time.

The NBB-20VS30-2 features a 30 Amp power input, (20) twenty remote switched IEC C13 outlets and (4) four 20 Amp UL-489 circuit breakers. Each circuit breaker protects 5 IEC C13 outlets and supports up to 20 Amps. The NBB-20VS30-2 is built for vertical Zero U (0U) installations where rack space is limited. Mounting kits are available to fit a variety of rack and closet enclosures.

The NBB-20VS30-2 can also perform remote reboots and power shutdowns on individual outlets according to a user-defined schedule, when a ping command fails or on demand.

The NBB-20VS30-2 can be configured and operated via its convenient IP web browser interface or by any SNMP MIB based enterprise management software. To see a complete list of approved management software, or to recommend additional software or compatibility testing, please see our Software Integration section.


Includes Enterprise Management Software

network boot bar with enterprise management software


All WTI console server and switched PDU products include WTI’s convenient Enterprise Management Software, which drastically simplifies the task of managing multiple WTI devices spread throughout your network infrastructure. The WMU Enterprise Management Software provides a centralized command interface that allows administrators to easily manage, label and control multiple WTI console servers and switched PDUs in large network applications, reducing the time required to access console port command and power control and reboot functions for connected devices.

Once installed on your PC or laptop, the WMU Enterprise Management Software can search a user-defined IP address range on your network and discover all WTI console servers and switched PDUs within the range. Discovered units are then added to the Enterprise Management Software’s inventory, allowing administrators to assign a descriptive tag to each WTI device in order to denote the location or function of the device. In addition to providing a centralized interface for remote console port access and power reboot and control functions, the Enterprise Management Software can also be used to control firmware updates for WTI products and edit and manage user accounts at individual or multiple WTI devices.



Power Control & Management:

  • Remote Individual or Group Outlet Switching
  • On/Off/Reboot/Default Load Shed Switching
  • Outlet Sequencing & Power Up Delays
  • User-Defined Power-Up Default Status & Outlet Status Retention
  • Plug Naming, Grouping & Access Control
  • Scheduled On/Off/Reboot Switching
  • Ping Watchdog with Auto Reboot
  • IP & SNMP Control

Metering/Monitoring/ Reporting:

  • True RMS Current Metering
  • Total or Branch Specific Metering
  • Reports kWh, kW, Amps, Volts, Temperature
  • Over-Current Alarms
  • Current High and Low Alarms
  • Over-Temperature Alarms
  • Lost Voltage (Line In) Alarm
  • Ping-No-Answer Alarm
  • Invalid Access Lockout Alarm
  • Power Cycle Alarm
  • Circuit Breaker Open Alarm
  • Alarm Notification via Email, SNMP, SYSLOG
  • Alarm, Command, Access Audit, Current, Voltage, Watts and Temperature Logging

In-Band/Out-of-Band Access:

  • In-Band (10/100/1000Base-T Ethernet Port)
  • Out-of-Band (External Modem Ready)
  • Local (RJ45 RS232 SetUp Port)
  • Supports Both IPv6 and IPv4

Access/Security/Authentication:

  • HTTPS, SSHv2, SNMPv3
  • Transport Layer Security (TLS) v1.2
  • IPSec / OpenVPN
  • IPtables
  • Two-Factor Authentication: RSA® Ready
  • AAA: LDAP / Active Directory / Kerberos / RADIUS / TACACS+
  • Embedded validated FIPS 140-2 Cryptographic Module
  • Port Specific Password Protection
  • Invalid Access Lockout & Alarm

Unit Management:

Network-grade Power Distribution:

  • 30 Amp In-Feed
  • 0U Vertical Mounting
  • 20 Amp Circuit Breaker

Specifications

Interface Descriptions:
Ethernet Port: 10/100/1000Base-T, RJ45
Console Port: (1) RJ45, RS232C

Power:
Voltage: 208 VAC, 50/60 Hz
Power Distribution:
(80% Derated)
4.8/5.8 kW
Power Outlets: (20) IEC C13
Input Feed: 30 Amp IEC-60309 (Commando)
Current: 30 Amps
Branches per Input: 2 (5 Outlets per Branch)
Power Input Cables: 30 Amp IEC-60309 (Commando)

Physical/Environmental:
Size: 68.5"H x 1.75"W x 3.25"D (0U) - 13" Base has 5.5"Depth
(174 cm H x 4.5 cm W x 8.25 cm D)
Weight: 40 Lbs. (18 Kg) Shipping Weight
Operating Temperature: 32° to 122° F (0° C to 50° C)
Humidity: 10% to 90% RH
Mounting: 0U Rack Brackets Included

Agency Approvals:
FCC, UL




When new, improved versions of product firmware become available, the "Upgrade Firmware" function can be used to update the unit. To receive the latest available firmware update from WTI Technical Support, please click on the link below and complete the form.

Request Firmware

To speak with a qualified sales engineer about your firmware request, please call: 1.800.854.7226



Latest Firmware Version:

Any questions? Submit your request regarding this product.

Loading...