VMR-8HD20-1 Outlet Metered Switched PDU Dual 120V 8 Outlet

VMR-8HD20-1 Outlet Metered PDU Dual 20A 120V (8)5-15R

WTI Rack Mount PDU, Outlet Metered, Switched, 1U, Dual 20 Amp Input, 100-120V AC, (8) NEMA 5-15R Outlets

SKU:  VMR-8HD20-1
Price: $997.00 (USD)

Accessories Included:

  • Quick Start Guide
  • DX9F-DTE-RJ - Adapter, DB-9F to RJ-45
  • Network Cable, Cat 5e, 7 ft.
  • DPC-19-515P-8F - Power Supply Cable, C19 to NEMA 5-15P, 8 ft. (2 ea.)
  • Power Cable Retainer Kit
Dual Input
Voltage: 120V
Current: (2) 20A (16A Derated)
Connector: (2) IEC C20
Dual Output
Voltage: 120V
Current: (2) 20A (16A Derated)
Outlets: (8) NEMA 5-15R

 

WTI's VMR series metered PDUs can help you keep an eye on your data center, and let you know when your equipment is acting up before things get completely out of hand. Knowing is only half the battle, the VMR also allows you to reboot outlets when an attached device ceases to respond, disable outlets to reduce current consumption or switch on cooling devices to lower rack temperature.

The VMR includes a robust selection of monitoring features, including event alarms, outlet-specific metering and SNMP polling to help you keep tabs on vital network elements, avoid costly service calls and maximize up time.

Includes Enterprise Management Software

outlet metered pdu with enterprise management software

All WTI console server and switched PDU products include WTI’s convenient Enterprise Management Software, which drastically simplifies the task of managing multiple WTI devices spread throughout your network infrastructure. The WMU Enterprise Management Software provides a centralized command interface that allows administrators to easily manage, label and control multiple WTI console servers and switched PDUs in large network applications, reducing the time required to access console port command and power control and reboot functions for connected devices.

Once installed on your PC or laptop, the WMU Enterprise Management Software can search a user-defined IP address range on your network and discover all WTI console servers and switched PDUs within the range. Discovered units are then added to the Enterprise Management Software’s inventory, allowing administrators to assign a descriptive tag to each WTI device in order to denote the location or function of the device. In addition to providing a centralized interface for remote console port access and power reboot and control functions, the Enterprise Management Software can also be used to control firmware updates for WTI products and edit and manage user accounts at individual or multiple WTI devices.



Power Control & Management:

  • Remote Individual or Group Outlet Switching
  • On / Off / Reboot / Default / Load Shed Switching
  • Outlet Sequencing & Power Up Delays
  • User-Defined Power-Up Default Status & Outlet Status Retention
  • Plug Naming, Grouping & Access Control
  • Scheduled On / Off / Reboot Switching
  • Ping Watchdog with Auto Reboot

Metering / Monitoring / Reporting:

  • True RMS Current Metering
  • Total or Branch Specific Metering
  • Reports kWh, kW, Amps, Volts, Temperature
  • Over-Current Alarms
  • Current High and Low Alarms
  • Over-Temperature Alarms
  • Lost Voltage (Line In) Alarm
  • Ping-No-Answer Alarm
  • Invalid Access Lockout Alarm
  • Power Cycle Alarm
  • Circuit Breaker Open Alarm
  • Alarm Notification via Email, SNMP, SYSLOG
  • Alarm, Command, Access Audit, Current, Voltage, Watts and Temperature Logging

In-Band / Out-of-Band Access:

  • In-Band (10/100Base-T Ethernet Port)
  • Out-of-Band (External Modem Ready)
  • Local (RJ45 RS232 SetUp Port)
  • Supports Both IPv6 and IPv4

Security & Authentication:

  • HTTPS, SSHv2, SNMPv3
  • Transport Layer Security (TLS) v1.2
  • IPSec / OpenVPN
  • IPtables
  • Two-Factor Authentication: RSA® Ready
  • AAA: LDAP / Active Directory / Kerberos / RADIUS / TACACS+
  • Embedded validated FIPS 140-2 Cryptographic Module
  • Port-Specific Password Protection
  • Invalid Access Lockout & Alarm

Unit Management:

  • RESTful Web Services API
  • DHCP / FTP / TFTP / SFTP / SCP
  • CLI & HTML5 Web-Based GUI
  • Includes Enterprise Management Software
  • Multiple Concurrent SSHv2 Sessions
  • Full MIB Support
  • NTP for True Server Sync

Network-grade Power Distribution:

  • Dual 20 Amp In-Feeds
  • 1U Horizontal Mounting
  • 19" Rack Mounting Brackets


Specifications

Interface Descriptions:
Ethernet Port: 10/100Base-T, RJ45
Console Port: (1) RJ45, RS232C

Power:
Voltage: 100 - 120 VAC, 60 Hz
Power Distribution: (80% Derated) 3.2/3.8 kW
Power Outlets: (8) NEMA 5-15R
Power Inlets: (2) IEC-60320-C20
Input Feeds: (2) 20 Amps
Current: 20 Amps (16 Amps Derated)
Branches per Input: 1
Power Input Cables: Includes 15 Amp Power Cord

Physical/Environmental:
Size: 1.75"H x 19"W x 8.7"D (1U)
(4.5 cm H x 48.3 cm W x 22.1 cm D)
Weight: 12 Lbs. (5.4 Kg) Shipping Weight
Operating Temperature: 32° to 122° F (0° C to 50° C)
Humidity: 10% to 90% RH
Mounting: 19" Rack Brackets Included

Agency Approvals:
FCC, UL, CE, PSE (VMR-8HD20-1J Only)



Power Cables (Order Separately)

Description Supply Plug Equipment End Rating Part #
NEMA 5-20P to IEC-60320-C19
8FT (2.4M)
NEMA 5-20P C19 20A/125V DPC-19-520P-8F

NEMA L5-20P to IEC-60320-C19
8FT (2.4M)
NEMA L5-20P C19 20A/125V DPC-19-L520P-8F

IEC-60320-C20 to IEC-60320-C19
6FT (1.8M)
8FT (2.4M)
10FT (3.05M)
C20 C19 20A/250V
DEC-19-20-6F
DEC-19-20-8F
DEC-19-20-10F




When new, improved versions of product firmware become available, the "Upgrade Firmware" function can be used to update the unit. To receive the latest available firmware update from WTI Technical Support, please click on the link below and complete the form.

Request Firmware

To speak with a qualified sales engineer about your firmware request, please call: 1.800.854.7226



Latest Firmware Version:

Any questions? Submit your request regarding this product.

Loading...